RFD & RFDW:

Part of our Retrofit™ line, this surface-mounted aluminum cover has minimal installation time, requires little maintenance and is resistant to rolling loads, distortion and wear. 

It accommodates vertical offsets and a gradual taper minimizes the bump. 

The single-hinged assembly can accommodate a 1 3/8″ slab offset in floor elevation. 

Joint sizes range from 1″ to 8″.

MODEL	JOINT WIDTH	MINIMUM OPENING	MAXIMUM OPENING	EXPOSED SURFACE	BLOCKOUT WIDTH	BLOCKOUT HEIGHT
RFD-100	1.00″ (25mm)	0.75″ (19mm)	4.00″ (102mm)	9.38″ (238mm)	N/A	N/A
RFD-200	2.00″ (51mm)	0.75″ (19mm)	4.00″ (102mm)	9.38″ (238mm)	N/A	N/A
RFD-300	3.00″ (76mm)	0.75″ (19mm)	6.00″ (152mm)	11.38″ (289mm)	N/A	N/A
RFD-400	4.00″ (102mm)	0.75″ (19mm)	6.00″ (152mm)	11.38″ (289mm)	N/A	N/A
RFD-500	5.00″ (127mm)	1.00″ (25mm)	9.00″ (229mm)	15.38″ (391mm)	N/A	N/A
RFD-600	6.00″ (152mm)	1.00″ (25mm)	9.00″ (229mm)	15.38″ (391mm)	N/A	N/A
RFD-700	7.00″ (178mm)	12.00″ (305mm)	12.00″ (305mm)	18.38″ (467mm)	N/A	N/A
RFD-800	8.00″ (203mm)	1.00″ (25mm)	12.00″ (305mm)	18.38″ (467mm)	N/A	N/A
RFDW-100	1.00″ (25mm)	0.75″ (19mm)	4.00″ (102mm)	9.38″ (238mm)	N/A	N/A
RFWD-200	2.00″ (51mm)	0.75″ (19mm)	4.00″ (102mm)	5.38″ (137mm)	N/A	N/A
RFWD-300	3.00″ (76mm)	0.75″ (19mm)	6.00″ (152mm)	7.38″ (187mm)	N/A	N/A
RFWD-400	4.00″ (102mm)	0.75″ (19mm)	6.00″ (152mm)	7.38″ (187mm)	N/A	N/A
RFWD-500	5.00″ (127mm)	1.00″ (25mm)	9.00″ (229mm)	10.75″ (273mm)	N/A	N/A
RFWD-600	6.00″ (152mm)	1.00″ (25mm)	9.00″ (229mm)	10.75″ (273mm)	N/A	N/A
RFWD-700	7.00″ (178mm)	1.00″ (25mm)	12.00″ (305mm)	13.75″ (349mm)	N/A	N/A
RFWD-800	8.00″ (203mm)	1.00″ (25mm)	12.00″ (305mm)	13.75″ (349mm)	N/A	N/A